MSD coil wire hookup. changeover needed for tower?

I have an MSD distributor, which has the HEI sorta style connectors for the plug wires, and coil wire. The MSD blaster 2 coil has the socket style connection for the coil wire.

My coil wire has the HEI type on both ends.

Seems I remember a while ago seeing a "changeover" or conversion part that pushed into the top of the coil (socket end), but left a HEI type terminal sticking up so you could use this type of wire.

I can't find it in MSD's catalogue, or summit's site.

Are these available, or did I dream this .


codfish

I might have one of those kicking around, I know just what you mean...

Can't see a brand name on it, but is this what you mean?

Actually, I think it was an MSD brand from memory..and here they are at Summit

http://store.summitracing.com/partdetail...mp;autoview=sku

Thanks OZ.

Those look like what I need.

I should see if they have them separately. Don't need 9

codfish

If they don't have them sepertately, just holler..I know "who" has one..