Posted By: mikemotorhead
Where to get -New clutch for 67 Barracuda 273 4 speed - 05/21/09 03:27 PM
Car still has original clutch. I would like to put in something easy to drive in traffic.
Thanks Mike
Thanks Mike
Where to get -New clutch for 67 Barracuda 273 4 speed
Posted By: Anonymous
Re: Where to get -New clutch for 67 Barracuda 273 4 speed - 05/21/09 04:46 PM
I picked up a Zoom clutch from Jegs and I like it. Mine's a 318 4 speed. 
770-MU1647-1
http://www.jegs.com/i/Zoom+Clutches/770/MU1647-1/10002/-1
770-MU1647-1
http://www.jegs.com/i/Zoom+Clutches/770/MU1647-1/10002/-1
Posted By: mikemotorhead
Re: Where to get -New clutch for 67 Barracuda 273 4 speed - 05/21/09 04:50 PM
Thanks 64 I checked out the link but did not see a 67 273 listed! 
Mike
Mike
Posted By: Anonymous
Re: Where to get -New clutch for 67 Barracuda 273 4 speed - 05/21/09 04:55 PM
Should be a 10 1/2" 23 spline like mine. Check Rockauto for the size. Mine's a 70 318 in mine but it had the 10 1/2".
http://www.rockauto.com/catalog/raframecatalog.php
1967 PLYMOUTH BARRACUDA 4.5L 273cid V8 : Clutch : Clutch Kit Price Core Total
RHINO PAC Part # 05029A
Base; Diaphragm Option Kit; Disc Spec: 10-1/2" OD X 1" ID X 23T, Flywheel Spec: Flat
$138.79 $0.00 $138.79
$139.79 $0.00 $139.79
RHINO PAC Part # 05029
Base; Disc Spec: 10-1/2" OD X 1" ID X 23T, Flywheel Spec: Flat; Lever Style; Standard Kit
$142.79 $0.00 $142.79
SACHS Part # K167503
10 1/2 Inch Clutch; OD: 10 1/2; Size ID: 1; TEETH: 23T
* Non-stock item--shipping delayed up to 2 business days
$130.79 $0.00 $130.79
http://www.rockauto.com/catalog/raframecatalog.php
1967 PLYMOUTH BARRACUDA 4.5L 273cid V8 : Clutch : Clutch Kit Price Core Total
RHINO PAC Part # 05029A
Base; Diaphragm Option Kit; Disc Spec: 10-1/2" OD X 1" ID X 23T, Flywheel Spec: Flat
$138.79 $0.00 $138.79
$139.79 $0.00 $139.79
RHINO PAC Part # 05029
Base; Disc Spec: 10-1/2" OD X 1" ID X 23T, Flywheel Spec: Flat; Lever Style; Standard Kit
$142.79 $0.00 $142.79
SACHS Part # K167503
10 1/2 Inch Clutch; OD: 10 1/2; Size ID: 1; TEETH: 23T
* Non-stock item--shipping delayed up to 2 business days
$130.79 $0.00 $130.79
Posted By: Anonymous
Re: Where to get -New clutch for 67 Barracuda 273 4 speed - 05/21/09 04:59 PM
The one I posted will fit. This came up as the HP(expensive one) one for your car, same size.
http://www.jegs.com/i/Zoom+Clutches/770/HP1647-1/10002/-1
http://cgi.ebay.com/ebaymotors/Zoom-HP16...4291210009r2995
http://www.jegs.com/i/Zoom+Clutches/770/HP1647-1/10002/-1
http://cgi.ebay.com/ebaymotors/Zoom-HP16...4291210009r2995
Posted By: mikemotorhead
Re: Where to get -New clutch for 67 Barracuda 273 4 speed - 05/21/09 05:23 PM
Thanks 64 I do have the HP solid lifter motor. Should I get the HP one?
Mike
I do have the HP solid lifter motor. Should I get the HP one?Mike
Posted By: Anonymous
Re: Where to get -New clutch for 67 Barracuda 273 4 speed - 05/21/09 05:33 PM
It's double the price and I don't know what kind of feel it will have to it. The last zoom I ran was over 30 years ago and it was a @*&#@ to push in. I only know the one I got for my 64 has a nice feel and they say it has more grip. Some on here may have more experience if you want something stronger.
Posted By: therocks
Re: Where to get -New clutch for 67 Barracuda 273 4 speed - 05/21/09 05:42 PM
Had a Zoom in my 65 440 years ago.Lasted like 6 months.I like my Center Force.Expensive but light pressure and they last and grab.Just remove the over center spring.Rocky
Posted By: 446acuda
Re: Where to get -New clutch for 67 Barracuda 273 4 speed - 05/21/09 10:14 PM
Quote:I'm not 100% sure but I think the original clutch would be either a 9.25 or 10" so a 10.5" will not fit that flywheel. I may be wrong but it might be worth checking before ordering.
Car still has original clutch. I would like to put in something easy to drive in traffic.
Thanks Mike
Posted By: 446acuda
Re: Where to get -New clutch for 67 Barracuda 273 4 speed - 05/21/09 10:30 PM
Easy way to tell is remove lower cover. 5-7/8" between pressure plate bolt holes shown here is for 10.5" clutch and approximately 5-1/4 between holes is a 9-1/4 or 10". Even easier is that 10.5" uses 3/8" pressure plate bolts (9/16" wrench) and 9-1/4 and 10 use 1/2" or smaller wrench.
Posted By: Anonymous
Re: Where to get -New clutch for 67 Barracuda 273 4 speed - 05/21/09 10:46 PM
My 65 Barracuda which originally was a hi-po 273 4-speed came from the factory with a 9.5" clutch. Not sure about 67's, check before ordering a replacement.
Posted By: 70satelliteguy
Re: Where to get -New clutch for 67 Barracuda 273 4 speed - 05/23/09 02:52 PM
446acuda,I have 1/2 in. bolts and the distance between the pressure plate bolts is approx. 5-1/4 in. How do I tell if I should order a 9-1/4 or a 10.0 in. clutch?
Thanks Mike ( mikemotorhead at home computer)
Thanks Mike ( mikemotorhead at home computer)
Posted By: 446acuda
Re: Where to get -New clutch for 67 Barracuda 273 4 speed - 05/23/09 04:23 PM
either one, see the PM I sent you.
Posted By: fstfish66
Re: Where to get -New clutch for 67 Barracuda 273 4 speed - 05/25/09 06:07 AM
any 273 ive ever seen was 9 1/2,may not be enough room in a factory bell housing for a 10 inch clutch,,any good auto parts store can get you what you need,,or search rock auto for cross refrenceing, center force might make one im sure mc loed makes one