Moparts
pressure specs for valve spring
Posted By:
NachoRT74
pressure specs for valve spring -
06/18/08
05:43 PM
MP 3690933
thanks
Posted By:
MoparforLife
Re: pressure specs for valve spring -
06/18/08
06:18 PM
Don't have the spec's but the Mopar part number is: P3690933.
Not MP 3690933 which may be a jobber used number.
Posted By:
NITROUSN
Re: pressure specs for valve spring -
06/18/08
06:23 PM
P3690933 1.83"/1.86" Single/Damper 1.53" 0.224" 0.440"/0.500" Chrome
Vandium
From the mp catalog. The mp engine secrets should have the pressures.
Posted By:
MLR426
Re: pressure specs for valve spring -
06/18/08
08:21 PM
I think that spring is 110lbs at 1.860 but I
will have to check. Good for hydraulic street
cam.
logan426
Posted By:
ZIPPY
Re: pressure specs for valve spring -
06/18/08
08:33 PM
115lbs at 2" checking height
310lbs at 1.50"
Install at 1.83" to 1.86"
Posted By:
NachoRT74
Re: pressure specs for valve spring -
06/22/08
03:06 PM
ok, and what about the production Mopar PN 2658904 Valve spring ?
Posted By:
NachoRT74
Re: pressure specs for valve spring -
06/23/08
08:57 PM
Posted By:
ZIPPY
Re: pressure specs for valve spring -
06/24/08
08:08 PM
That part number does not exist in Chrysler's computer system. Maybe it did at one time, long ago, but not now.
Posted By:
NachoRT74
Re: pressure specs for valve spring -
06/24/08
08:09 PM
is supposelly stock spring for BB/RB HPs blocks... will post the 70/71 mopar catalog page
Posted By:
NachoRT74
Re: pressure specs for valve spring -
06/24/08
08:14 PM
sorry... is not 904 is
2
04
went toi check onm the springs I have and definitelly misstype the number
2658204
Posted By:
ZIPPY
Re: pressure specs for valve spring -
06/24/08
08:21 PM
That's a dead part number as of 1983, sorry
Posted By:
NachoRT74
Re: pressure specs for valve spring -
06/29/08
06:38 AM
ok, but they should have specs the same, no matter if dead part number
© 2024
Moparts Forums