Posted By: 440challenger
E body floor shift bracket location - 05/16/09 11:37 PM
Hello, im to the point on my 73 cuda restoration where i am about to convert my column shift car to a floor shift. I have the brackets, the shifter and most of the rods,etc. Does anyone have a pic of exactly where the brackets go on the floor hump? I see their is some indentations but a pic would be very helpful if someone has their carpet out. Thank you!!!
Posted By: 440challenger
Re: E body floor shift bracket location - 05/18/09 01:12 PM
anyone? I found some pics but not really too helpful. If i drill the hole in the floor where the circle is stamped in the pan do i mount the shifter in the park position? Also what is the shift bracket that has the hook go to?
Posted By: 440challenger
Re: E body floor shift bracket location - 05/20/09 01:23 AM
no one has their console out? Just need a pic of all the linkage etc installed
Posted By: 440fied
Re: E body floor shift bracket location - 05/20/09 03:37 AM
Posted By: 440challenger
Re: E body floor shift bracket location - 05/20/09 12:22 PM
excellent pics. can anyone tell me what this lever goes to with the hook?
Posted By: screamindriver
Re: E body floor shift bracket location - 05/20/09 11:36 PM
If you look closely you can just make out an "L" shaped spring...That hook anchors one end of the spring and the other end is fastened to the shifter rod...Heres a better pic I found and another
for the measurements..
Posted By: 440challenger
Re: E body floor shift bracket location - 05/21/09 02:17 AM
very nice, i notice that spring is missing on alot of peoples cars and they still work fine. i need all new bushings and washers for the linkage. Does anyone make a hardware/rebuild kit?