Moparts

Hoosier Pro Street Radials / M/T Sportsman S/R radials

Posted By: LAR_414

Hoosier Pro Street Radials / M/T Sportsman S/R radials - 05/11/09 07:06 PM

Anybody use any of these "Big" street radials? Looking for some feedback.

MY BFG Drag Radials are just about gone from street driving, and I'm tired of putting out the dough for them. I run a different set of M/T ET Streets when I drive to the track and race it. So I need a set of true radials that might last longer on the street.
Posted By: scratchnfotraction

Re: Hoosier Pro Street Radials / M/T Sportsman S/R radials - 05/11/09 07:48 PM

yes,yes I do

I just put 4 on this week,M/T sportman SR radials

26x8x15 on the front

29x15x15 on the rear

very nice,look good,ride good,plenty of traction so far,not that I got gobs of HP to lite em up

and should be much better in the rain with the flame tred design

max air to seat bead is 35 lbs,I am running 25 right now,watching the tread,wanting to see it clean all the way across

30 lbs had about 1" on the out sides holding dust/dirt

droped to 25 lbs and its cleaning all the way across the tread mow

still playing with air pressure and most liky will be 26 to 28 lbs

the M/T sportsman pros I have only 20 lbs max to seat the bed and ran them at 16-19 lbs

would drop them to about 12 lbs and they wrinkled up good on launch...sure dont last long on a daily driver at 100 miles a day though!,only 16 mounths

wont be going back to the old ones now,the SR is a very nice radial type that replaces the nylon/bias ply tires

so far the fronts at 25 lbs and looks good


M/T said I should get lots of highway miles with them,street compound rubber and radial construction,wet weather traction with the tred design

got them on a 85 1/2 ton stepside truck,lowerd and tubbed with 12" rims and 7" up front

they look ssswwwwweeeeeeettttttt!!!!!!!

900$ for a set

and the truck looks

Posted By: 340SHORTY

Re: Hoosier Pro Street Radials / M/T Sportsman S/R radials - 05/11/09 10:07 PM

Quote:

yes,yes I do

I just put 4 on this week,M/T sportman SR radials

26x8x15 on the front

29x15x15 on the rear

very nice,look good,ride good,plenty of traction so far,not that I got gobs of HP to lite em up

and should be much better in the rain with the flame tred design

max air to seat bead is 35 lbs,I am running 25 right now,watching the tread,wanting to see it clean all the way across

30 lbs had about 1" on the out sides holding dust/dirt

droped to 25 lbs and its cleaning all the way across the tread mow

still playing with air pressure and most liky will be 26 to 28 lbs

the M/T sportsman pros I have only 20 lbs max to seat the bed and ran them at 16-19 lbs

would drop them to about 12 lbs and they wrinkled up good on launch...sure dont last long on a daily driver at 100 miles a day though!,only 16 mounths

wont be going back to the old ones now,the SR is a very nice radial type that replaces the nylon/bias ply tires

so far the fronts at 25 lbs and looks good


M/T said I should get lots of highway miles with them,street compound rubber and radial construction,wet weather traction with the tred design

got them on a 85 1/2 ton stepside truck,lowerd and tubbed with 12" rims and 7" up front

they look ssswwwwweeeeeeettttttt!!!!!!!

900$ for a set

and the truck looks











Lets see em....
Posted By: scratchnfotraction

Re: Hoosier Pro Street Radials / M/T Sportsman S/R radials - 05/12/09 12:23 AM

umm? I gots pics but..I ams a little hickabilly and have not learned to post them on here...which seems easy exept to me

I will send them if some one will post them

cause I gots em fo sure

and they looks ssswwwwweeeeeetttttt!!!!!!!



been ridin all day today,gots the pressure at 27 lbs on the back

cleaning the tred all the way cross...

is that how you set air pressure?

thats the ways I has beens duz in it,well benn doing the 17/40 hawgs and mudder that way for yrs and dont wear em outs in the middle

looking to gets even treds wear

I am runinwhatIbrungs

they dont seem to slip thats for sure,they dont wrinkle at 12 lbs and thats not a good pressure for them anyways,thats for sure..but theys a hookin at 27 cold

Posted By: scratchnfotraction

Re: Hoosier Pro Street Radials / M/T Sportsman S/R radials - 05/12/09 11:33 AM



any one want to post pics of them for me?



Posted By: LAR_414

Re: Hoosier Pro Street Radials / M/T Sportsman S/R radials - 05/12/09 11:59 AM

I just sent you an e-mail.
Posted By: patrick

Re: Hoosier Pro Street Radials / M/T Sportsman S/R radials - 05/12/09 01:44 PM

when you make a post, right above the "continue" button, check the box that says "I want to preview my post and/or attach a file "

then pick the pic to attach. you may have to resize it beforehand, IIRC the file size limit is ~500k
Posted By: LAR_414

Re: Hoosier Pro Street Radials / M/T Sportsman S/R radials - 05/12/09 02:13 PM

They look good.

Attached picture 5224206-Tires3.JPG
Posted By: LAR_414

Re: Hoosier Pro Street Radials / M/T Sportsman S/R radials - 05/12/09 02:14 PM

2nd post

Attached picture 5224207-Tires1.JPG
Posted By: LAR_414

Re: Hoosier Pro Street Radials / M/T Sportsman S/R radials - 05/12/09 02:15 PM

Thanks for the pictures. Nice looking tires.

Attached picture 5224209-Tires2.JPG
Posted By: scratchnfotraction

Re: Hoosier Pro Street Radials / M/T Sportsman S/R radials - 05/12/09 02:21 PM

sorry for so many though

thanks for postin them up

I really like them so far,and have noticed there is less road noise from them over the sportman pros on the wighway

Posted By: Challenger 1

Re: Hoosier Pro Street Radials / M/T Sportsman S/R radials - 05/12/09 02:35 PM

I have the MT SR on both of my cars. Like em. BTW I have a new set of 30x12.00x15" that I want to sell. PM me if interested.
© 2024 Moparts Forums