Firm Feel fast ratio pitman arm and idler arm

Has anybody installed these arms from firm feel?
Just wondering if they are worth the money over
the stock set up.

I have the fast ratio pitman on a 70 cuda. It does make a big difference, makes a fast system out of a slow one. Still overassisted though.

For me it was worth it, I used the stage two box as well. Even better beeing able to pick it up in person.

Dan

If you have headers you should double check. There is no romm for the pitman on my car.

I have the fast ratio arms with the stage 3 steering box. It made a big difference compared to the oem set up. You can use the c-body idler?.... to save a few dollars.

On big blocks most of the 1 3/4 headers will fit since they all route the tubes pretty much the same. TTI 2" headers are the only larger tube header that I found that clears.

I did the stage 2 box with both arms... WORLD of difference.