Moparts

NE1 using a unilite in their 440 ?

Posted By: Genuinejed

NE1 using a unilite in their 440 ? - 06/15/08 05:50 PM

Just picked one up and was wondering if it's worth using. I have electronic with a chrome box now. Is there any advantage to the unilite? Also does anyone know how to hook it up? It has three wires coming out of it. I assume one is power and the other two are to the coil.
Posted By: 340SHORTY

Re: NE1 using a unilite in their 440 ? - 06/15/08 09:50 PM

not in a 440, but in a 383 and a 340. I like them till the module goes bad, (just like a fact ECM). IRC there is a red wire, goes to the + side of the coil. the other is a green wire that goes to the - side of the coil, and the brown wire goes to a good ground. Personally now days I prefer MSD products....
Posted By: hemi471

Re: NE1 using a unilite in their 440 ? - 06/15/08 10:33 PM

I think the Unilite is JUNK only because the modules burn-up quite often. If you decide to use it buy the Mallory power filter #29351 it will prevent the module from failing.
© 2024 Moparts Forums