Posted By: blk00rt
spring for kickdown linkage - 04/28/09 09:38 PM
I know where i can find the spring for the carb, but where can I find the spring that attaches to the bell housing on the transmission to the kick down arm on the valve body. This is for a 904 transmission if that makes a difference.
Posted By: sharpie
Re: spring for kickdown linkage - 04/28/09 09:46 PM
mine's an internal spring?
The arm returns itself.
Posted By: Challenger 1
Re: spring for kickdown linkage - 04/28/09 10:03 PM
You can still get repos, Try Bill at Hiteh Auto GTX6970 If not then anyone who sells repo stuff will have them.
Posted By: John_Kunkel
Re: spring for kickdown linkage - 04/28/09 11:56 PM
There is no linkage return spring at the transmission end, the linkage return spring is at the carburetor end.
Posted By: AARCONV
Re: spring for kickdown linkage - 04/29/09 12:28 AM
some diagragms showed a spring down there but they are incorrect...spring is on top by the carb linkage
Posted By: gtx6970
Re: spring for kickdown linkage - 04/29/09 12:32 AM
the only kickdown springs used that I'm aware of
Posted By: blk00rt
Re: spring for kickdown linkage - 04/29/09 09:34 PM
thanks everyone, I am getting close to starting it and thought there was a spring down there too.
Posted By: 69L78Nova
Re: spring for kickdown linkage - 04/30/09 12:19 AM
Throttle pressure linkage....not kickdown linkage
Posted By: NFURY8
Re: spring for kickdown linkage - 05/04/09 07:41 AM
I pulled a 46RE out of a 2001 van this weekend, it had a spring on the pressure lever that went up to a small bracket where the shifter pivot rod bolts to the transmission. I looked at an old 727 in the garage and noticed the lever had the same hole in it that the spring was attached to.
For what ever it is worth.