Moparts

TTI exhaust muffler choice?

Posted By: maxwedge1

TTI exhaust muffler choice? - 04/19/24 01:57 PM

after 20 yrs the 3" dynomax super turbos are shot....i would like something a bit more aggressive.
is there anything else the same dimensions that plugs in or close enough that would work with some slip extensions or will a trip to exhaust shop be needed?
Posted By: JohnRR

Re: TTI exhaust muffler choice? - 04/19/24 02:49 PM

Originally Posted by maxwedge1
after 20 yrs the 3" dynomax super turbos are shot....i would like something a bit more aggressive.
is there anything else the same dimensions that plugs in or close enough that would work with some slip extensions or will a trip to exhaust shop be needed?


dynomax ultra flos , what length are your current cases ?
Posted By: FurryStump

Re: TTI exhaust muffler choice? - 04/19/24 03:20 PM

I like Pypes race pros’ I picked up 2/10’s changing to them from the muffler you have been running. Also lost the drone that it had at 2500 rpm. Do not get the violators, they are loud and sound horrible.
Posted By: maxwedge1

Re: TTI exhaust muffler choice? - 04/19/24 04:22 PM

case is 16 " overall is 23. i have looked around and found some close but no way of knowing if the pipe centerlines will match
Posted By: topside

Re: TTI exhaust muffler choice? - 04/19/24 05:39 PM

Within a given case size, I haven't found the entry/exit pipe centerlines to be significantly different if they're the same center/offset design.
It can get tricky if you have to rotate a tailpipe a bit in a tight space and/or welded-on tips on an A-body.
I swapped 3 sets of mufflers on a '64 B-body trying to get the right sound, and it was easy.

Of my 2 Road Runners, the yellow one with a full restoration exhaust from Accurate is louder and crisper than the other (blue car) which is the same except for Dynomax Super Turbos.
Engine-wise, yellow has a bit more CR and slightly more aggressive cam specs, and the Decor Group chrome tips; both have stock exhaust manifolds.
Posted By: Neil

Re: TTI exhaust muffler choice? - 04/19/24 07:58 PM

Hooker Aero Chambers sound good, supposedly flow pretty well, and are not crazy loud under normal driving. Unsure if they are an easy transfer from what you have?

If super aggressive sounding is the priority I think of the Spintech mufflers. More like a Flowmaster type sound on steroids than an insulated turbo muffler.
Posted By: JohnRR

Re: TTI exhaust muffler choice? - 04/21/24 03:15 AM

Originally Posted by FurryStump
I like Pypes race pros’ I picked up 2/10’s changing to them from the muffler you have been running. Also lost the drone that it had at 2500 rpm. Do not get the violators, they are loud and sound horrible.


Short case ?
Posted By: FurryStump

Re: TTI exhaust muffler choice? - 04/21/24 12:44 PM

It fit in place of the Dynomax muffler with the TTI system that is in my 68 Barracuda Fastback
Posted By: JohnRR

Re: TTI exhaust muffler choice? - 04/21/24 12:48 PM

Originally Posted by FurryStump
It fit in place of the Dynomax muffler with the TTI system that is in my 68 Barracuda Fastback


Thanks ... that would be the shortcase .
Posted By: INTMD8

Re: TTI exhaust muffler choice? - 04/23/24 03:33 PM

Originally Posted by FurryStump
I like Pypes race pros


x2
Posted By: Sunroofcuda

Re: TTI exhaust muffler choice? - 04/25/24 09:13 PM

FWIW, I believe the Dynomax mufflers have a 16" body length. The Mopar mufflers are offset in / center out.
Posted By: gtx6970

Re: TTI exhaust muffler choice? - 04/25/24 10:10 PM

1966 Satellite 383 , full 2.5inch TTI exhaust with Dynomax Super turbos

https://www.youtube.com/watch?v=H1eP_QMFfMU
Posted By: gtx6970

Re: TTI exhaust muffler choice? - 04/25/24 10:12 PM

1966 Satellite Hemi , slight bump over stock compression. Stock H pipe and 2.25 inch tail pipes
Also Dynomax Super Turbos

https://www.youtube.com/watch?v=gg7SvUNjtGA


Both are exact same style mufflers, just different part number due to pipe size
© 2024 Moparts Forums