Posted By: SanityLost
Rear suspension lowering blocks? - 06/14/08 08:24 PM
Where to get? Type of material? experience with them ETC.
Posted By: 74fldart
Re: Rear suspension lowering blocks? - 06/14/08 09:32 PM
i would look into the truck customizing companies.i used to get catalogs from stylintrucks.com. they had them. as far as exp. with them and cant answere that . the blocks are either alum. or steel .
Posted By: Anonymous
Re: Rear suspension lowering blocks? - 06/14/08 09:58 PM
i prefer the steel ones to the aluminum ones for various reasons. wouldn't go much more then a 1" drop with
blocks. also watch the pinion angle.. becouse it will change.
Posted By: MoparforLife
Re: Rear suspension lowering blocks? - 06/14/08 10:09 PM
Very simple to make with some 2.5 inch rectangle heavy gauge rectangle stock, a drill press, and a couple of drill bits. You will need longer u bolts too.
Posted By: AdamR
Re: Rear suspension lowering blocks? - 06/15/08 12:59 AM
I think GregZ was selling some nice billet ones.
Posted By: Moe
Re: Rear suspension lowering blocks? - 06/15/08 01:22 AM
Apparently Mancini stop carrying them.
Posted By: GoodysGotaCuda
Re: Rear suspension lowering blocks? - 06/15/08 01:29 AM
I have the cheapo ones here, 1" blocks. No issues for a couple thousand mies. Then again, i dont lay down much for power either.