Posted By: alexdodge2
Ball & Trunnion - 09/02/23 05:35 PM
Looking for a place that sells new ball & trunnion for a 62 Dodge. Can't find any on Ebay. Any ideas?
Ball & Trunnion
Posted By: Sniper
Re: Ball & Trunnion - 09/02/23 05:38 PM
oldmoparts.com
Of course, and just like when you go to the parts store, model matters. An 880 will not use the same as a Lancer.
Of course, and just like when you go to the parts store, model matters. An 880 will not use the same as a Lancer.
Posted By: moparx
Re: Ball & Trunnion - 09/02/23 06:11 PM
aren't there only two sizes of the B&T joint ?
if so, what are the sizes called ?
if so, what are the sizes called ?
Posted By: therocks
Re: Ball & Trunnion - 09/02/23 06:17 PM
try bernbaums parts they carry a lot My 65 still has the OE one in it.When I needed one for my 57 Chrysler NAPA found be a leather one.Drove my 57 for like 5 years and no problems with that one.I think I have a NOS one here somewhere.Guy gave it to me a few years after I had my 57.Saving it for my 65 if its needed .
Posted By: jcc
Re: Ball & Trunnion - 09/02/23 07:00 PM
PM sent.
Posted By: elmor353
Re: Ball & Trunnion - 09/02/23 10:57 PM
I thought 64 was the last year of the B&T? My 65 has the slip yoke.
Posted By: Cab_Burge
Re: Ball & Trunnion - 09/03/23 04:36 AM
Originally Posted by elmor353
I thought 64 was the last year of the B&T? My 65 has the slip yoke.
All the 1965 stick shift Dodges and Plymouths A bodies and B bodies I've seen had the ball and trunnion trans U joints, all the 1965 B body Dodge and Plymouths automatic cars I've seen had the slip yoke tranny yokes with the conventional U joints in them, up: Thanks be to Mopar for finally doing that change
