440 Cam Bearings In stock?

Does anybody know where to buy a set from a vendor who has them in stock? All the places I have called say delivery may be the end of next month if I am lucky. I have a block at the machine shop waiting for a set.

Try Northern Auto Parts. I believe they are in Sioux City Iowa. I was just on their website and it showed they had them.

I checked it out and it appears you may be right. I will call to verify they have them in stock before I order today and I will let you know. Thanks

I called and out of the 4 or 5 listed they had none in stock, all were on back order. I am still looking if anyone has any leads.

Dropped some 360 heads off at my local mach shop on 3 17. Customer who was leaving was told by the owner he cannot currently find any cam bearings for the customers 440. Everything is upside down.

Rock Auto has Sealed Power 1453M in stock according to their website.

I just checked Rockauto and every big block cam bearing is out of stock.

Boy a Google search sure shows them available. Phone time.

Politics do not belong in this forum!!

What gets me is that such a common part used for years cannot be found. I am still looking.

I’ve got three sets on order. I guess I need to check my machine shop to see if he has any.

Noted and taken care of...

I for one can understand the statement ,[I need some] when you can't get cam bearings for a bb mopar thing's are f.u.b.r . We have always blamed the one in charge, why stop now it was ok before . sorry

I think I have an extra set of durabond cam bearings new in the box. I’ll take a look.

Cam bearings are almost unobtanium right now. Most of them are made by Durabond and put in other packaging. We have had 40 sets on order for almost 6 months just BB and hemi. I sold all I could let go of. Talking with a big supplier and he said in Feb they placed a 400 piece stock order for all makes and models. They got three. It is not just cam bearings either.....Todd

Fixed

Found a set after digging deep. My son found them in a small machine shop in East Texas. Just stopping by and asking, believe it or not, and it was the only set he had.
Seems there are quite a few people looking for them right now.
One last comment, a member on this site was willing to part with a set from his stash, truly an act of good faith.

Silkes auto parts shows to have them. 1821771 1821772 1821773 1821774 1821775 (904) 737-8600

It's crazy everyone is out of cam bearings! Summit is saying April 10th if you want the Durabond PDP-17 cam bearings.

im still looking too,these dont have them,ebay,440 source,mancini,jegs,summit,hughes

I would dig around this website for contact info and try to find out when they plan to run production on them again.
https://www.mahle.com/
Or check local machine shops to see if they have any, thats what I did.
Good luck.

Is there a difference between Hemi and 440 wedge cam bearings?

Basically no, the original Hemi front cam bearings had grooves on the insides in them and the other B, RB front cam bearings didn't. I'm not sure which cam bearing companies still use them and those that don't

Yep, you have to check out local machine shops right now. I found a local shop that had one set left... sold!

My local shop said he had one set. I needed three for the builds I’ve got. Showed up to drop off one block, he had two sets. I bought them both. I’ve got four sets on order from summit.

I just got a notice from summit that my DPD-17 bearings just got shipped from NV. Should be here on the 4-5. I ordered them in February.

We've got a bunch in stock.

https://store.440source.com/USA-Made-Cam-Bearings-Set-of-5/productinfo/108-1017/

Yes, engine bearings are becoming more and more difficult to find. I have hundreds of sets on order from anything from SBC's, SBF's, BBF's, Mod Motors, Coyotes, LS's, RY45's, FR9's, SBM's, Hemi's and even Flatheads from several different manufacturers. Almost no one just stocks anything these days.

Got a set of durabond from rockauto last week.