Posted By: Anonymous
440-6 idle adjustment - 04/18/09 01:44 PM
I am advised to try leaning out my idle a little to rid the backfire on deacceleration. Do I turn the adjustment screws in or out to lean it out? Also what is a standard for the outboards? Holley tech thought maybe 1/8 turn out but was not sure.
Posted By: hemiluver
Re: 440-6 idle adjustment - 04/18/09 02:12 PM
I think on those carbs its out to lean because your adding air not fuel
Posted By: Mr.Yuck
Re: 440-6 idle adjustment - 04/18/09 02:22 PM
are yuo sure you don't have a tiny exhaust leak somewhere? Especially if it's only out one side.
Posted By: macmic87
Re: 440-6 idle adjustment - 04/18/09 04:45 PM
all 3 carbs are clockwise to lean, counter clockwise to make richer.