3 Speed Wiper Motor Wire Sleeves

Hey guys.

Anyone have a link or source to the wire sleeves that go over the four solid wires coming out of the coils for a 3 speed wiper. Its for a 73 E-body for reference. Doing a close as original home restoration as my budget allows, but striking out. Half temped to put some heat shrink on the wires then put the shell of some correct color paracord over top. LOL

Thanks in advance.

Look inside some smaller appliances. Many have braided wire covering, but usually white.
Higher temperature devices use that covering for heat protection: microwave, hair dryer, electric heaters, etc.
Off course you can always just re-color them with markers.
Size is based upon what it comes out of.
Real trick is to find smaller diameter stuff.

This stuff, or.....?

https://www.amazon.com/Painless-709...hy=9011680&hvtargid=pla-523276864000

Check you inbox i have them
ns1aar.com

Just a picture I saved from way back when

Thanks everyone for your help. PM sent

not to highjack but one question. 3 speed wiper motor is
Off
Slow
High

that would be a two speed. a three speed would be off, slow, medium and high.

thanks

Then I have a 4 speed trans: N,1,2,3

Variable would be Off then a clockwise turn to the full stop

thanks wise guy!! this is the reason this site is not traveled as much

It's really park 1 2 3 so only 3 speeds. 2 speed is park high low so high and low only 2 speeds.