Posted By: Vert
Front shock lower rubber bushing needed - 71 Barracuda - 04/14/09 12:46 AM
I just noticed I'm missing the rubber bushing on the lower end of my front shock where it mounts to the LCA. The shop moved my upper shock mounts out 3/4 inch when they were painting the engine compartment. My guess is they misplaced or forgot it. But its been many months so they wont have it. Local Autozone has a 5/8 id x 1 7/16 poly bushing set, but I don't know if it'll fit. Anyone have one they can measure, or one they don't need?
Posted By: Vert
Re: Front shock lower rubber bushing needed - 71 Barracuda - 04/15/09 01:38 AM
Its awakening after a long sleep. Big, loud, and strong. Gotta work out the squeaks, rattles, buzzes, and clatter. Not easy over the valve train clatter and 2 1/2 inch TTi mufflers at 1500 rpm.
Posted By: Vert
Re: Front shock lower rubber bushing needed - 71 Barracuda - 04/17/09 01:10 AM
One of you guys has to have a set of shocks hanging in the garage. I just need a could of numbers ...
Posted By: Snoopy
Re: Front shock lower rubber bushing needed - 71 Barracuda - 04/17/09 01:22 AM
BUSHING, Front Shock, Lower Mounting
P/N 1635588
Posted By: Vert
Re: Front shock lower rubber bushing needed - 71 Barracuda - 04/17/09 12:24 PM
Snoopy! Thanks! Guess I can order one without wondering if it'll fit. The local parts stores have poly pieces that are 5/16 id x 1 7/16 but I didn't want to grab them unless I knew they'd fit.
Thanks again.