Moparts
1990 w250 ECM pim out??
Posted By:
flyman
1990 w250 ECM pim out?? -
05/29/22
01:04 PM
Im looking for a 1990 dodge truck 4x4 ECM pin out diagram. Any body got a FSM laying around they want to sell? Thanks Ken
Posted By:
John_Kunkel
Re: 1990 w250 ECM pim out?? -
05/29/22
08:39 PM
In that year, the ECM was called a Single Board Engine Controller (SBEC) and the pin outs will depend on diesel or gas and gas engine size. I have a '92 manual (might be the same) and could scan the page for you.
Posted By:
flyman
Re: 1990 w250 ECM pin out?? -
05/30/22
10:28 AM
I have a 318. In my 1994 Dakota manual there is a page that lists colors and position of all wires coming out of computer. Thats what Im after. Thanks
Posted By:
John_Kunkel
Re: 1990 w250 ECM pin out?? -
05/30/22
04:31 PM
Kinda hard to scan the page in a printer but here's the best I can do. Again, this is from a '92 book.
Posted By:
flyman
Re: 1990 w250 ECM pin out?? -
05/30/22
07:00 PM
Thanks John
Posted By:
trw1982
Re: 1990 w250 ECM pin out?? -
05/30/22
07:53 PM
1990 is probably tbi 318. my 1991 is 318 tbi. 1992 is probably magnum 318. don't think they are the same computer. might be wrong.
Posted By:
trw1982
Re: 1990 w250 ECM pin out?? -
05/30/22
08:05 PM
this is from 1990cd fsm for v8 gas. if it is upside down i am sorry. took pic with phone.
Posted By:
flyman
Re: 1990 w250 ECM pin out?? -
05/31/22
11:01 PM
Thanks You guys are the best.
© 2024
Moparts Forums