lowering 66 abody front

well the possibilitiys to drop a mopar are not huge without major fabrication ,I wonder if any ones has a adress who sell dropped spindles for a 66 a body . If not i wonder how the intress would be about notched custom lower steering arms ?

Well you can just turn down the T bars and lower the car. But if thats to easy you can get dropped spindals I believe for some mopars( help me here guys I've seen dropped spindals but not sure what they make them for B or F body I think) then its just getting the right ball joint combination and possible changing the upper control arm to the larger ball joint arm.

okay anyone has a adress of the spindles ,because i like to have my car real low ,at the moment the car stands in my garage without the torsionbars mounted and it s still to high for me.

I think Fatman Fabrication has Mopar drop spindles.

Have any pics of how it sits?

I got my E-body t-bars turned down to give me 24 inches to the ground from the fender arch with 245/45/17's. Doesn't bottom out but I don't know how much lower you'd want to go and still drive it.

They make airbag suspensions but not sure if your a body is covered.

Tom

i had one a valiant and it was realy low with only the t bars turned down , i will post a pic tomorow