Moparts
FITEC
Posted By:
dart4forte
FITEC -
06/18/21
01:32 PM
Who’s running a FITEC. Just wondering after it has its initial learning is there options for fine tuning?
Posted By:
Stanton
Re: FITEC -
06/18/21
02:08 PM
You would probably find all your answers here:
https://fitechefi.com/
Posted By:
Bakaruda
Re: FITEC -
06/18/21
02:38 PM
I had one on my Fathers BB Corvette. They are tunable, one problem with them is they need a good vacuum source.
Posted By:
metallicareload
Re: FITEC -
06/18/21
04:31 PM
Originally Posted by Bakaruda
I had one on my Fathers BB Corvette. They are tunable, one problem with them is they need a good vacuum source.
How much is a "good" vacuum source?
They are somewhat tunable, but other than some initial "tuning" I've been content to leave it alone. I got 26,000+ miles on mine
Posted By:
AndyF
Re: FITEC -
06/18/21
07:21 PM
Originally Posted by dart4forte
Who’s running a FITEC. Just wondering after it has its initial learning is there options for fine tuning?
They have limited tuning and data logging capability compared to a Holley Sniper.
Posted By:
Fat_Mike
Re: FITEC -
06/18/21
08:16 PM
Goody has installed/tuned one, so hopefully he'll see this and chime in. Here's a thread, not specifically about FITECH, but might give you some insight into FITECHs limitations/capabilities.
https:/
/
board.moparts.org/
ubbthreads/
ubbthreads.php/
topics/
2729453/
1.html
Posted By:
451Mopar
Re: FITEC -
06/19/21
02:15 PM
I put the 1200 PA on my 500" Stroker engine just to see if it would work on an engine with 4" of vacuum.
It took a little tuning, but works good.
https:/
/
www.youtube.com/
watch?v=o87GQaT9ouE
© 2024
Moparts Forums