Posted By: mopar71RR
ignition coil - 04/04/09 11:57 AM
Hi,
What coil are you using and would recommend with MP electronic ignition and orange ECU(360)?
Thanks
Posted By: Anonymous
Re: ignition coil - 04/04/09 12:20 PM
i use an excell 42000v coil on my setup unless you go supercharged or something you dont need anything special. it comes in chrome or yellow and was only 30 bucks.
Posted By: Anonymous
Re: ignition coil - 04/04/09 12:20 PM
or is it accell? cant remember
Posted By: 1toolguy
Re: ignition coil - 04/04/09 12:43 PM
Just make sure you get the right coil. Accell has two differnt versions the 8140 is the most common one stocked by parts stores and is "universal". UNLESS you have a Mopar electronic ignition that is. It'll cause your ingnition box to over heat and shut down after about 15 minutes of driving, took me months to figure that one out.
You want part #8145, it'll work great.
Posted By: n_bogie1984
Re: ignition coil - 04/04/09 01:38 PM
nothing beats a blaster 2 coil. never had a problem with them other then they like to eat cheap wires
Posted By: therocks
Re: ignition coil - 04/04/09 07:17 PM
I agree MSD Blaster.Rocky
Posted By: NachoRT74
Re: ignition coil - 04/04/09 07:50 PM
MSD is a very ( if not the most ) reliable coil.
MP coil is the same piece. As far I know MSD manufacturers to MP
Posted By: 383man
Re: ignition coil - 04/05/09 12:18 AM
I use the Acell super coil with the MP orange ecu. I have had this setup in a car since 1997 and it still works great. Ron