Posted By: cudabitten
Painting the engine compartment with the engine in? - 04/04/09 12:15 AM
Hey, Any of you ever done this? I'm sure you have. Got any ideas or gotcha's for me.
Thanks.
Thanks.
Quote:
I saw the same and it would of been easier to just remove the motor.
You can do it but why?
Quote:
Master cly is on the wrong side, but otherwise it looks great.
Quote:
What kind of motor mounts did you use to get that slant six to stand up like that?
I think it would be cool to convert a slant six car over to a hemi six. The only thing that looks like trouble would be the carburetor location and of course the carb and trans linkage. I'm sure the power difference would be significant.
BTW I'd have never guessed the engine was in the hole when that was painted. Sure looks good from here.
Quote:Quote:
Master cly is on the wrong side, but otherwise it looks great.
Just look at your monitor from the other side
Quote:
Should be real easy with a short nap roller and an extension pole. Then you can just use a trim brush to cut in later. Or maybe a mop...
Quote:
Even better drop the engine, trans, and the k frame.
Quote:
Yeah take a couple more bolts out and the motor will be out of the way.
Sorry but you are at that point.
Quote:That is a good idea,never thought of that
Granted- pulling the engine will give you the best results. A trick I learned- is to use aluminum foil to wrap your motor and parts. It conforms to whatever you are wrapping, and does not get blown around from the air pressure. You can really wrap things tight, and have much more room to get your paint down in the nooks and crannies.