Moparts

670 Street Avenger Acc pump cam and nozzle spec.

Posted By: Dart 340

670 Street Avenger Acc pump cam and nozzle spec. - 03/31/09 04:12 PM

Anyone know off hand the cam color and discharge
nozzle size for a street avenger 670? The jets
are 65's I've found out so far.

Thanks.
Posted By: edbux

Re: 670 Street Avenger Acc pump cam and nozzle spec. - 03/31/09 04:17 PM

The cam is pink, the discharge nozzle is 0.031--of course, this is all factory listings.
Posted By: Dart 340

Re: 670 Street Avenger Acc pump cam and nozzle spec. - 03/31/09 04:21 PM

Weird, my cam looks to be either white or green,
but it's faded enough it's difficult to tell.

I don't believe it's ever been changed from stock.
Posted By: dgc333

Re: 670 Street Avenger Acc pump cam and nozzle spec. - 03/31/09 04:58 PM

I can verify the pink cam but have never pulled the squirter to check but the owners manual does state 0.031. The primary jets are 65's and the secondaries are 68 and that I can verify. Most all Holley come with a 6.5 power valve and that is what my 670 has.
Posted By: Dart 340

Re: 670 Street Avenger Acc pump cam and nozzle spec. - 03/31/09 05:08 PM

Thanks for the info Dave.

The 670 I dropped on ran good for a couple of days
then started acting up so I'm going to put a kit
in it. Guess sitting in the garage all winter
didn't do it any good.

So I have the 3310 750 back on it and was thinking
about tweaking jets and acc cam to get her to
mimic what the 670 was doing for me.

Thanks again.
© 2024 Moparts Forums