Posted By: jh27-1970
DynaCorn, AMD, Goodmark Thoughts who is best? - 07/26/20 06:20 PM
Who makes the better product ? Recommendation as to were to buy? Thanks.
Posted By: Stanton
Re: DynaCorn, AMD, Goodmark Thoughts who is best? - 07/26/20 06:36 PM
If you want light weight, Goodmark is the way to go ... its 2/3 the thickness of stock sheet metal !! Does Dynacorn even make Mopar stuff ?!?!?
Posted By: jh27-1970
Re: DynaCorn, AMD, Goodmark Thoughts who is best? - 07/26/20 06:51 PM
Thanks, Yes they make some stuff. not looking for light weight, It is the frame rail that I need for a very daily driver convertible. Just want to put what is best in it.
Posted By: crackedback
Re: DynaCorn, AMD, Goodmark Thoughts who is best? - 07/26/20 06:53 PM
Look for a good used piece would be my suggestion on a rail
moparmarks might have something
Posted By: 5carguy
Re: DynaCorn, AMD, Goodmark Thoughts who is best? - 07/26/20 10:10 PM
What rail and what are you looking for?
Posted By: AeroMonte
Re: DynaCorn, AMD, Goodmark Thoughts who is best? - 07/27/20 01:24 AM
AMD hands down. Built an entire 70 Charger with their stuff and the quality was awesome. I would not use a used frame rail section if AMD makes it new. Used rails are still 50 year old parts and subject to fatigue.
Posted By: gzig5
Re: DynaCorn, AMD, Goodmark Thoughts who is best? - 07/27/20 05:27 AM
We just installed a Dynacorn back half for an E-body. This is the trunk floor, frame rails, shock cross member, torque boxes, and back seat back all in one pre-assembled piece. essentially everything from the rear floor pan to the bumper. It fit very well, saved a bunch of time, and was a lot cheaper than the individual pieces. I've been using AMD for the rest of the parts. The Goodmark and brand-x stuff I've handled don't compare well to the AMD.