Challenger windshield washer lines

Hi
Does anyone on here have pictures showing the oem routing for the windshield washer lines in a 1970 Challenger? R/T hood if that matters. The car I am working on is missing everything after the bottle😂
Thanks

....here's the factory print for 70 Cuda/Challenger, if you need a certain section zoomed in let me know...

Mike

That is great, Dayclona! Thank you! The scan is a little blurry, but I think I'll figure it out. I will take a look at it today and let you know if I need any more info😀
By the way: Do you happen to know where I should look for a download able wiring diagram for 1970 Challenger?

http://www.mymopar.com/index.php?pid=109

I can zoom in on any section/text if needed, plus contrast the background if your curious about a certain section of the print...let me know

Mike

Thanks both of you!👍👍
Thanks to your answers I have pretty much figured it out. I am still a little puzzled as when I hold the nozzles over their mounting holes the squirter hits a rib inn the hood. Are the squirter supposed to be bent sideways some? I should have the correct parts as they are labeled ut "70-74 E-body" and looks identical to the ones in the drawings you posted.

The squirters on my 70 are about 1/8 of an inch below the ribs....

Good info👍 But the squirt wil still hit a rib when fired😝

Position the squirter JUST below the upper surface of the cowl/hood
so they won't get caught when washing the car and you'll be good.

Joe

Ok. Thanks. Just need to bend thhe sideways to avoid fluid hitting the ribs. 😔

it was very common back in the day to have to adjust the squirter nozzles by slightly bending them on a lot of cars to get the spray pattern correct without hitting the ribs, be it hood or cowl mounting.
i had a homemade "tool" built out of thin wall tubing that snugly fit the nozzles so i could bend them up, down, and sideways until the spray pattern was where the driver wanted it, but it got lost over the years.