Posted By: NachoRT74
A10 bearings on 8 3/4" axles? - 12/31/19 02:36 PM
What do you know guys about that? I allways have known all 8 3/4" axles uses A7 bearing set, but a friend who need to replace the bearings on his 70 NewYorker had to return the A7 set he got and found he needed the A10 set
?????????.
Posted By: Sniper
Re: A10 bearings on 8 3/4" axles? - 12/31/19 03:05 PM
Only difference is the width of the bearing A10 is narrower, not sure why he thought an A7 was wrong.
Posted By: NachoRT74
Re: A10 bearings on 8 3/4" axles? - 12/31/19 06:18 PM
by the PN of the bearing installed, mostly sure by the previous owner, althought he thinks it was still the original from factory
Posted By: John_Kunkel
Re: A10 bearings on 8 3/4" axles? - 12/31/19 07:13 PM
A-10 is mostly for GM and Jeeps.
Posted By: NachoRT74
Re: A10 bearings on 8 3/4" axles? - 01/01/20 10:36 AM
Definitely he was wrong thinking it was the factory assembly still on car. Sent me a pic of the axle and bearings were installed REVERSED, with small end cone toward inside... of course the adjuster plate got damaged too.
Posted By: Sniper
Re: A10 bearings on 8 3/4" axles? - 01/01/20 01:23 PM
kinda wondered what was going on, seems someone before him messed things up and now he gets to deal with it, been there, done that.