Moparts
Victor head intame choices
Posted By:
Jeff_383
Victor head intame choices -
10/17/19
01:23 PM
Do the Victor heads require only a Victor intake? Or can any be used?
Posted By:
fast68plymouth
Re: Victor head intame choices -
10/17/19
01:44 PM
You use any intake that matches the port size(std or MW) of the heads and deck height of the motor.
Posted By:
Clanton
Re: Victor head intame choices -
10/17/19
01:49 PM
I put a factory iron on mine and it fit but was still not low enough to get the factory hood back on so I went back to a Victor 440 on an RB engine.
Posted By:
Jeff_383
Re: Victor head intame choices -
10/27/19
12:23 AM
Even with a drop base it wouldn't fit?
Posted By:
Clanton
Re: Victor head intame choices -
10/27/19
12:35 AM
Originally Posted by Jeff_383
Even with a drop base it wouldn't fit?
I just tried with no filter.I used clay to check the gap about 1" and once the rpm's got around 5k it went rich to 10/1 a/f.I ran it 1st without a hood with no trouble.
I could mill the choke horn but I don't want to mess with the tuneup.
© 2024
Moparts Forums