Posted By: Howard
CLUTCH BALL STUD SEALS - 03/21/09 03:11 PM
I'M TRYING TO PUT THE BALL STUD SEALS ON THE BALL STUDS,BUT WITH NO SUCCESS. I PUT SOME GREASE ON THE TIP OF THE BALL STUD AND ON THE SEAL BUT STILL CAN'T GET IT ON. THE HOLE ON THE SEAL IS ONLY A QUARTER OF AN INCH, IS THERE AN EASY WAY TO STRETCH THE SEAL LIKE HEATING IT OR SOMETHING?
Posted By: 70440+6bbl
Re: CLUTCH BALL STUD SEALS - 03/21/09 04:38 PM
Just replaced the ones on my '70 'Cuda and they are a tight fit, but you will be able to get them on. After a few tries, they tend to stretch a bit more.
Posted By: Snoopy
Re: CLUTCH BALL STUD SEALS - 03/21/09 06:13 PM
Put them in a glass of hot water and they will soften up enough to allow easy installation.
Posted By: Howard
Re: CLUTCH BALL STUD SEALS - 03/22/09 04:41 AM
I finally got them on I put needle nose pliers in the hole and opened it up wide enough to slip them on.
Thanks
Howard