Posted By: bobs69
Dana 60 - 02/14/19 08:46 PM
Anyone know the difference in the width of a 69 b body Dana 60 and a 65 coronet 83/4
Dana 60
Posted By: Cab_Burge
Re: Dana 60 - 02/14/19 08:50 PM
I think between 1.0 to 1.5 inch total, maybe a little more 
Posted By: ZIPPY
Re: Dana 60 - 02/14/19 09:06 PM
It's in the Tech Archives over here:
http://www.moparts.org/Tech/Archive/axle/16.html
http://www.moparts.org/Tech/Archive/axle/16.html
Posted By: therocks
Re: Dana 60 - 02/15/19 04:47 PM
-Its not much but as said about an inch or so wider.I have a 69 R/T rear in my 65 Belvedere.The wheels sit out a bit farther but they work.Pad are the saem width .Paid 35 bucks for it years ago with 3.91 Sg and springs and shock mounts.Rocky
Posted By: 62maxwgn
Re: Dana 60 - 02/15/19 05:53 PM
Originally Posted By therocks
-Its not much but as said about an inch or so wider.I have a 69 R/T rear in my 65 Belvedere.The wheels sit out a bit farther but they work.Pad are the saem width .Paid 35 bucks for it years ago with 3.91 Sg and springs and shock mounts.Rocky
Is it a Dana or 8 3/4 ?
Posted By: therocks
Re: Dana 60 - 02/15/19 08:19 PM
Sdosent matter they are the same width But mine is a 8 3/4.They didnt make 2 differnt withs for the same bodys.Rocky
Posted By: 62maxwgn
Re: Dana 60 - 02/15/19 10:28 PM
Originally Posted By therocks
Sdosent matter they are the same width But mine is a 8 3/4.They didnt make 2 differnt withs for the same bodys.Rocky
I know that,only reason I ask was you said 3.91 gears and you didn't specify and that couldn't have been a Dana unless someone changed gears.