Posted By: plumcrazyb
Throwout bearing clips - 06/07/08 09:57 PM
Before I ruin something does anyone have a pic of how the clips go on the fork? I can get the fork on the bearing but the clips wont budge. 70 superbee.
Posted By: therocks
Re: Throwout bearing clips - 06/08/08 02:57 PM
Dont have a pic but I just tilt the bearing to the inside of the fork and push.They are tight but will slip on.A very tiny bit of heavy grease also helps.Ive had a few that I had to have 2 people.One to hold the fork and bearing and one to pull the clip end up a bit with good pliers while pushing them on.Some I just line up and then smack them on with my hand.Rocky
Posted By: plumcrazyb
Re: Throwout bearing clips - 06/10/08 03:02 AM
I'm still not sure which way it goes on. Springs don't seem to want to move either. Heres a pic.
Posted By: wildman340
Re: Throwout bearing clips - 06/10/08 03:20 AM
The fork goes on the other side of the t/o bearing ears.
Posted By: wildman340
Re: Throwout bearing clips - 06/10/08 03:28 AM
Pic of correct way.
We're on the same page Pink!
Posted By: plumcrazyb
Re: Throwout bearing clips - 06/10/08 04:55 AM
Thanks!!!! Just what I needed.