Steering coupler clamp

Posted By: wkroncke17

Steering coupler clamp - 01/17/19 05:35 AM

So I’ve started to put this together and haven’t yet tried to put this dang clamp on.
It seems pretty tough at first, is there any special tricks?

Attached picture 535FBC5E-4FD2-48EE-AA6D-80C412934C7E.jpeg

Attached picture 535FBC5E-4FD2-48EE-AA6D-80C412934C7E.jpeg

Posted By: moparpollack

Re: Steering coupler clamp - 01/17/19 05:55 AM

I installed mine after the column coupler was installed in the car.

You still need to put the roll pin in the coupler and you cannot do that until the coupler is on the steering box.

Posted By: wkroncke17

Re: Steering coupler clamp - 01/17/19 06:27 AM

Originally Posted By moparpollack

I installed mine after the column coupler was installed in the car.

You still need to put the roll pin in the coupler and you cannot do that until the coupler is on the steering box.

So does it split apart and the two ends fit in the hole that the roll pin is in?
Any pics of it installed?