Moparts

340 cam plate bolt hole ?

Posted By: calrobb2000

340 cam plate bolt hole ? - 01/14/19 06:24 PM

hi

rebuilding a 340 and need to know the size of the oil hole in the 1 bolt that holds the cam plate on .

the one i have looks large to me like someone may have inlarged the hole size ?

thank you !
Posted By: gtsdude

Re: 340 cam plate bolt hole ? - 01/14/19 07:49 PM

Don't think it really matters, some came without a bolt at all.
Posted By: RapidRobert

Re: 340 cam plate bolt hole ? - 01/14/19 09:52 PM

it was an 1/8" hole (in the bolt). early or late (I forget which) had the bolt w hole & the other (early or late) had the drip tray that elim'd that bolt. that is drip oiling & for the ultimate you could drill a .015 (1/64) hole in an alum NPT pipe plug & drill/tap/thread it into the front of the pass horizontle oil gallery & a 3/8 hole in the cam plate for it to squirt out onto the chain. Shorten this pipe plug as to not block off oil down to the #1 main/drivers side gallery (that would be disastrous!). Maybe the chain gets enough splash as is but its fun to mod things & evidently some was needed cuz Ma did the drip oiling. Do the same (.015) in a 3/8 alum pipe plug next to the intergear at the other end/side.
© 2024 Moparts Forums