Moparts

what difference between '94and '98 mag eng ? *DELETED*

Posted By: Wedgeman

what difference between '94and '98 mag eng ? *DELETED* - 03/10/09 02:33 PM

Post deleted by Wedgeman
Posted By: patrick

Re: what difference between '94and '98 mag eng ? - 03/10/09 04:12 PM

intake manifolds are different, the '94 has EGR, the '96-up don't.

injectors are different, 94 are ~23lb/hr, 96-up are ~19lb/hr

ECU is different.

van front accessory drive is slightly different that a full size trucks, too.

that said, you should be able to take the newer motor and swap the older motor's intake/injectors on and you're good to go.
Posted By: deansrr

Re: what difference between '94and '98 mag eng ? - 03/10/09 05:34 PM

4
Posted By: Andrewh

Re: what difference between '94and '98 mag eng ? - 03/10/09 06:09 PM

Pretty much what was said above.

The electrical connectors for the injectors and computer are all different.

The power steering pump bracket is different.
The bracket holding the a/c and idler pully and alternator is different, as well as the a/c compressor.
Posted By: Wedgeman

Re: what difference between '94and '98 mag eng ? - 03/10/09 10:12 PM

Ok got myself a '94 model 360 mag engine today, with all the wiring.........going ahead with the swap.........wish me luck ! lol

Dan
Posted By: Jim_Lusk

Re: what difference between '94and '98 mag eng ? - 03/10/09 10:27 PM

Quote:

Ok got myself a '94 model 360 mag engine today, with all the wiring.........going ahead with the swap.........wish me luck ! lol

Dan




Good luck. We are doing a similar swap, but a 96 318 Mag into an 84 Ramcharger. Fortunately we got the whole wrecked Dakota for parts.
Posted By: Todd_DesMarais

Re: what difference between '94and '98 mag eng ? - 03/10/09 10:38 PM

May want to compare flexplates as the later units have weights and a neutral balanced converter. (handy for those early/late swaps like mine)
Posted By: Wedgeman

Re: what difference between '94and '98 mag eng ? - 03/10/09 10:39 PM

Cool !

This is going to be a lot of fun too!

Keep me informed of your prgress
Dan
veneerguy@msn.com
© 2024 Moparts Forums