TRUNK TORSION RODS ID HELP WANTED

Posted By: moparjohn

TRUNK TORSION RODS ID HELP WANTED - 08/17/18 08:21 PM

Recently I tried to help a guy out looking for a pair of trunk torsion rods for a 68 69 70 Charger. In my first picture I show what a pair of those look like. The curved end is the feature I want to focus on. The problem is I found 2 pair that are squared off and about 2" longer? Could some one ID these that are shown in the second picture?
Thanks! MJ

Attached picture IMG_4650.JPG

Posted By: Morty426

Re: TRUNK TORSION RODS ID HELP WANTED - 08/19/18 04:25 AM

I think you are going to need the overall length of the long straight part to help with the ID

Posted By: moparjohn

Re: TRUNK TORSION RODS ID HELP WANTED - 08/20/18 05:07 PM

Thanks for the idea Morty426!
The length of the straight rods is 44 1/2". The overall length from end to end is 46 1/4". I hope this helps someone identify these?
Thanks! MJ

Posted By: Morty426

Re: TRUNK TORSION RODS ID HELP WANTED - 08/21/18 08:14 AM

Originally Posted By moparjohn

Thanks for the idea Morty426!
The length of the straight rods is 44 1/2". The overall length from end to end is 46 1/4". I hope this helps someone identify these?
Thanks! MJ

MJ - If you ping me this Sunday I can go check my Charger and GTX and Superbee to see if they are the same length