Rocker Molding Clip for 69 Dart GTS

I am looking for Rocker Molding Clip (Trim on the rocker) for 1969 Dart GTS, I got from Stephen and it not right one way too small. So where can I get one?

Thanks
Brad

R/T Specialties has it, they were made off of my originals a couple decades ago. If you have the reproduction molding or the replacement Camaro or later Dart (73-76) they will not work. The blue one's that R/T Specialties sells only fit original rocker moldings.

Here is a picture...

I have those but way too small, my is 1/2 inch and I needed 1 1/2inch

Ok I will contact R/T Thanks

Put up a picture of the rocker molding you have, especially each end. Also measure it and post the measurements. It sounds like you have aftermarket or wrong moldings.

Here is a picture of rocker moldings with the correct one on the left, the Camaro part in the middle, and the 73-76 on the right.

Look like my is 73 trim