Posted By: Anonymous
70 cuda electrical? - 06/06/08 11:55 AM
it seems I am having a ground problem with my gas gauge and need to make a ground in the dash area. Do I want the ground wire connected to the positive side of the gauge? Does each gauge have to be grounded in the dash area?
Posted By: mark7171
Re: 70 cuda electrical? - 06/06/08 12:26 PM
is fuel only reading half full?
Posted By: Anonymous
Re: 70 cuda electrical? - 06/06/08 08:14 PM
needle does not move, shows empty
Posted By: cudarex
Re: 70 cuda electrical? - 06/06/08 08:29 PM
Do you have the ground strap that grounds the tank /sending unit to the steel line?
Posted By: Anonymous
Re: 70 cuda electrical? - 06/06/08 09:30 PM
everything by the gas tank is hooked correctly and test just fine and when we cross the power by the tank the gauge reads full so the gauge is ok
Posted By: 340Scamp
Re: 70 cuda electrical? - 06/07/08 02:26 AM
If the ground strap jumping the rubber hose is in place and still not working then your steel fuel line isn't grounded. When this happens I just run a ground from the sender to the frame with a separate wire.