?? on 528 mech cam in B block...

Hi all.....quick question....I have a 452 in my wagon and originally it was built with a 383 resto MP cam...has 10.4:1 measured compression and Indy rebuily 452 heads with big valves and E-brock Performer RPM intake...I have used the MP 528 mechincal cam before, but with manual trans cars. I loved how this cam ran, but am worried about having a stock converter in my pushbutton automatic.

will it work or do i need to back down a little bit more??

Mike

I would put a loose converter in there.

probably would depend on if the stock converter is a 11 3/4" or 10 3/4" (383cuin).