VIPER V-Band Exhaust Clamp?

What years of Vipers used a V-Band clamp to connect the headpipe/catalytic converter to the exhaust header/manifold?

Chrysler part# for this?

I have done a little more research on this today & here's what I have found:

I need in particular the clamps that connect the headpipe/cat converter to the cast exhaust manifolds for a 1998-2002 Viper. They are part# 4848909AA. They are NS1 from Chrysler as of last year, & no dealers are showing any NOS on them. Anybody have a photo of one or a couple of them for sale??? I'd even take one.

Thanks.

Understandably this is not the exact answer your seeking BUT if you can find a dimension of the clamp in question or have the parts your sealing/joining with the clamp in hand and can measure the required dimensions.

Most likely RG Ray was the OEM supplier. My 03 concorde uses V-bands on the exhaust manifold to catalyst connection and right on the clamps next to the pentastar and mopar # they say R.G Ray.

http://www.normaamericasds.com/sites/def...ert%20Clamp.pdf

Understood - in addition to RG Ray, there's Breeze. These Viper V-Bands for the 2nd Gen are turning into a great mystery.