Posted By: BcudaChris
TTI 2.5" X pipe exhaust/Gear Vendors - E body - 02/20/18 11:07 PM
Is anyone running a TTI 2.5" x pipe setup and a gear vendors in an E body?
TTI website says no go, but they also say their systems won't clear an FF rear sway bar, and I have seen a couple of cars running that setup.
Posted By: RTSE4ME
Re: TTI 2.5" X pipe exhaust/Gear Vendors - E body - 02/21/18 12:01 AM
I have a friend with a GV/727 and TTI 1 7/8" headers that runs a TTI 3" x-pipe. It is a 70 cuda.
Posted By: BcudaChris
Re: TTI 2.5" X pipe exhaust/Gear Vendors - E body - 02/21/18 01:03 AM
Sounds like it can certainly be made to work, I'll be running a 408/904 with 1 3/4 super comps.
Do you know if your friend that to do more than adjust the way the system hangs?
Posted By: RTSE4ME
Re: TTI 2.5" X pipe exhaust/Gear Vendors - E body - 02/21/18 02:24 PM
I don't think he did anything out of the ordinary to make it fit. He did have make a minor floor mod for the GV.
Posted By: BcudaChris
Re: TTI 2.5" X pipe exhaust/Gear Vendors - E body - 02/21/18 07:39 PM
Sweet, great to hear. Thanks