Posted By: GoodysGotaCuda
Ebody - Going back to Power brakes - What parts needed? - 02/04/18 04:45 AM
My Barracuda was originally a power brake car, it now has manual brakes and I'd like to gather parts to get it back to running power brakes.
That being said, I have no factory power brake components. The firewall and dash/pedal support are still original, if that matters.
I have found this one, but it only comes with a master cylinder. I'd rather not buy a $80-$100 master cylinder that I will not use, if I can help it.
https://www.mpbrakes.com/images/MPB-F200-48.pdf
That being said, I have no factory power brake components. The firewall and dash/pedal support are still original, if that matters.
- Is anyone aware of a source for the parts I need to convert over?
- I would like a 2-bolt master cylinder booster
- I do not need a master cylinder, I will be going with another Wilwood unit
I have found this one, but it only comes with a master cylinder. I'd rather not buy a $80-$100 master cylinder that I will not use, if I can help it.
https://www.mpbrakes.com/images/MPB-F200-48.pdf