Posted By: 71birdJ68
Splash Shields - 01/31/18 05:00 PM
I have a 71 B body that didn't have the splash shield on it. I have some more, but don't know where the two different kinds if fasteners go. Anybody have a picture? Thanks
Posted By: moparmarks
Re: Splash Shields - 01/31/18 06:24 PM
Which shields? The frame shields?
Posted By: 71birdJ68
Re: Splash Shields - 02/01/18 01:13 AM
Yes, there are 2 on the left side, and one on the right. They never used rivets from the factory, and there are two different kinds of fasteners.
Posted By: moparmarks
Re: Splash Shields - 02/01/18 01:31 AM
The longer rear shield on the left is for automatics cars. Manual cars didn't have that one.
70 and older they were riveted on. 71-2 they have screws. I've seen both a self-tapping machine screw and a coarse sheet metal type. Both are hex head.
Posted By: 71birdJ68
Re: Splash Shields - 02/01/18 03:17 AM
The kit that are available have 2 with big captive area washer, and the other two ar just bolts with captive washers. This is for a 71