Posted By: Pntastar69
440 Source Flywheels - 01/17/18 02:52 AM
Looking at the 10.5 130 tooth for a 360 that is internal balanced. Are these any good for the street? Looks like the cheapest around.
http://store.440source.com/1045-Billet-Steel-Flywheel-New/productinfo/113-1014/Thanks,
Posted By: earlymopar
Re: 440 Source Flywheels - 01/17/18 03:45 PM
I've been looking at that one as well. It looks like the weight is slightly lower than others on the market and an OEM unit but isn't a lightweight like the 20lb Mcleod flywheel. I think this is a great deal on what would be a good street / strip flywheel.
- EM
Posted By: moparfan
Re: 440 Source Flywheels - 01/17/18 05:28 PM
I'm using one, just had to run a tap in the bolt holes to get the pressure plate bolts in, other than that seems fine.
Posted By: Cuda340
Re: 440 Source Flywheels - 01/17/18 06:31 PM
Posted By: 4406bbl
Re: 440 Source Flywheels - 01/17/18 08:58 PM
I have used the 8 hole wheel with no issues.
Posted By: rowin4
Re: 440 Source Flywheels - 01/18/18 05:43 AM
Do you have a 8 hole bolt patterned crank in that 360 ?