Moparts

FBO ignition and MP electronic ignition

Posted By: Chal340

FBO ignition and MP electronic ignition - 03/01/09 07:48 PM

I have a MP electronic ignition kit (P3690426) and i would like to know if it’s possible to use the MP distributor with the A688 fbo kit (ECU, coil and ballast resistor).
Posted By: RapidRobert

Re: FBO ignition and MP electronic ignition - 03/01/09 07:52 PM

Oui qui est un plan excellent & quand vous recevez le droit d'organisation de corbe vous serez en pliene forme
Posted By: Dakota_Don

Re: FBO ignition and MP electronic ignition - 03/01/09 08:17 PM

sure, It should work fine .. FBO recurved my MP dist and I used with his stuff, but i didnt have good luck with his box (failed) and the coil leaks.. if you have it use it, if your buyin it go MSD..
Posted By: ThermoQuad

Re: FBO ignition and MP electronic ignition - 03/01/09 08:46 PM

Use the mp distributor & FBO coil/control box-but be sure the distributor is checked for proper phasing of the rotor to the cap and corrected if necessary.

There were some quality control issues within the manufacturing of some FBO control boxes which cause them to fail. That is something that occurred in the past and has not been of recent memory.

The FBO products work as advertised unlike some expensive stuff hawked here on moparts and elsewhere. Don't let the poorly informed influence your decision.


Please note the ground straps.


Attached picture 5062697-Picture1118r.jpg
Posted By: B5 Bee

Re: FBO ignition and MP electronic ignition - 03/01/09 08:59 PM

I ran the A688 FBO ignition kit with a MP distributor. It ran well at first, then it failed. I bought it 3 or 4 years ago if time frame has anything to do with it.
Next ignition I buy is going to be a Mallory Hy-Fire6, it has more features for less money than the MSD equivalent.
Posted By: Dakota_Don

Re: FBO ignition and MP electronic ignition - 03/01/09 09:26 PM

Quote:

I ran the A688 FBO ignition kit with a MP distributor. It ran well at first, then it failed. I bought it 3 or 4 years ago if time frame has anything to do with it.
Next ignition I buy is going to be a Mallory Hy-Fire6, it has more features for less money than the MSD equivalent.



for the money spent I wish i went with msd the first time.. My whole set up from FBO was wrong.. now its costing me double to fix it again..
Posted By: Dartsport540

Re: FBO ignition and MP electronic ignition - 03/01/09 10:12 PM

I run the FBO box, coil, and a recurved distributor. This summer was the 5th year running everything. I had a box and pickup go bad this year. I put a new FBO box and FBO distributor in it again. Also bought an extra, just to have, for spares.
Posted By: cogen80

Re: FBO ignition and MP electronic ignition - 03/02/09 12:35 AM

i know a couple personal friends that used the fbo set ups and both went through multiple control boxes. they did get the replacements for free though so that is good. do yourself a favor and buy two ballis resistors and control boxes so your not stranded somewhere. the MP dist is easy to recurve so do that yourself.
Posted By: ademon

Re: FBO ignition and MP electronic ignition - 03/02/09 01:16 AM

Seems like a lot of guys with multiple fbo problems still buy from them, Why? is the spark from their box, coil and ballast stronger than my chrome box, msd blaster II, & msd .8 ohm balast resistor?
Posted By: cogen80

Re: FBO ignition and MP electronic ignition - 03/02/09 01:19 AM

good question. i have asked basically the same thing and no one can say.. seems to be a fad around here or something.
Posted By: 440PURSUIT

Re: FBO ignition and MP electronic ignition - 03/02/09 01:35 AM

Man , I got the wole kit for my convert! Really apalling quality in the distributor....

Junk bent housing blasted to pee so the cap wouldn't fit. The star wheel wasn't pinned correctly and the star wheel was floating on the shaft. I was really surprised. They must have blind people picking the housings and assembling by my experience. I swapped to an accel cap, pinned the wheel correctly and the thing actually worked as ordered.

I'd buy MSD next time for sure!
Posted By: 84Stepside

Re: FBO ignition and MP electronic ignition - 03/02/09 01:53 AM

was that the FBO kit or the MP kit?
Posted By: dave571

Re: FBO ignition and MP electronic ignition - 03/02/09 05:10 AM

Quote:

Seems like a lot of guys with multiple fbo problems still buy from them, Why? is the spark from their box, coil and ballast stronger than my chrome box, msd blaster II, & msd .8 ohm balast resistor?




I'm surprised that there seems to be "multiple problems". I sold FBO for 4 years, and never warranteed a ecu.

The only issues I ever had, was the early FBO kits came with a poor ballast resistor.

As for why it's better than the blaster II with a chrome box, is the blaster II is intended for use with a capacitive discharge set up (like MSD).

Without that, it's output is nothing special. The FBO coil is setup for use with conventional spark system, so it's spark output is better.

The chrome box and the FBO box have very similiar specs when compared head to head.
Posted By: RapidRobert

Re: FBO ignition and MP electronic ignition - 03/02/09 06:41 AM

Quand j'ai tire mon roleau de FBO,l'ecu &(le depute) lestent le rouleau a commence a divulguer de l'huile de la tour immediatement donc je l'ai ferme.J'ai parle avec Don & il adit que j'avais besoin de serrer en bas la vis dans le haut auquel je l'ai informe que je ne savais pas que e'etait maresponsibilite des'arreter la fuite dans un(marquezle noveau rouleau) & quand je l'ai assure que le lest de depute que j'ai utilise etait plus d'ohms que son il m'a envoye un noveau roleau noir et un ecu gratuitement. je ne les ai pas utilises encore mais va dans plusieurs mois, je me souviens quand FBO a repris connaisance & a gagne un culte immediate suite a si beaucoup d'utilisateurs avait des rapports rougeoyants de comment don systieme a joue. J'ai entendu la voie plus bonne que mauvais & je verrai bientot pourmoi(la 2eme fois autorde de) le fait qu'il l'a rendu le droit(en includant l"expedition a fait un croyant de moi. Je me souviens vrainment il y a beaucoup d'annee de quelau'un critisized un des ses produits ou quelque chose & il a bascule avec la tirade la plus plus furieuse dont j'etais te moin jamais sur intermet. Je veux que se L'aire sauve comme c'etait vrainment une oeuvre d'art.
Posted By: Chal340

Re: FBO ignition and MP electronic ignition - 03/02/09 07:58 AM

You translated with google traduction? it's not very clear but i understood.;)
thank you everyone for your answers.
Posted By: RapidRobert

Re: FBO ignition and MP electronic ignition - 03/02/09 08:19 AM

Quote:

You translated with google


yes but the problem I had was that our keyboards dont make the notations above(some of) the letters that I saw on the google translation plus I'm sure I made a few typing errors. As good as your English is I should have left it in English.
Posted By: B5 Bee

Re: FBO ignition and MP electronic ignition - 03/02/09 12:06 PM

Quote:

Quote:

Seems like a lot of guys with multiple fbo problems still buy from them, Why? is the spark from their box, coil and ballast stronger than my chrome box, msd blaster II, & msd .8 ohm balast resistor?




I'm surprised that there seems to be "multiple problems". I sold FBO for 4 years, and never warranteed a ecu.

The only issues I ever had, was the early FBO kits came with a poor ballast resistor.






Dave,
My FBO gave me problems after I had it 1 year.
It was already out of warranty by the time I got everything else on the car finished, so I didn't bother calling Don. The first problem was after about 200 miles.
I think I had a bad FBO coil. It first went thru 2 ballasts, then the FBO ECU went, replaced with a MP chrome ECU, then another ballast, then the MP chrome ECU. Only thing left was the FBO coil. I replaced it with the cheap Accel coil I had laying around along with another MP chrome ECU, 3 years and 5,000 miles later it is still going.

Next time for me will be a Mallory HyFire 6, I think MSD products are overpriced.
Posted By: 1MYTGTX

Re: FBO ignition and MP electronic ignition - 03/02/09 06:44 PM

Im going on my 3rd year with my FBO stuff (ign kit & dizzy) with no troubles yet
Posted By: edbux

Re: FBO ignition and MP electronic ignition - 03/03/09 12:16 AM

I also went thru a FBO ECU. It was replaced with less hassle than anything I've ever tried to return. This time I used a ground strap with it. Over the years, I've had a few ECU's die on me and they were all from Mopar On different cars). I think dying ECU's are something we are just forced to live with.

In FBO's defense, once I installed his system, my car started a lot easier. The distributor he curved really made a difference...to the good.That goes for the freezing winters here in Idaho. It replaced a Mopar Performance system.

Any more problems and I might just go to a dual point distributor. I kind of miss yanking out the distributor to install/adjust points. Also, I think my dwell meter is lonely.
Posted By: RapidRobert

Re: FBO ignition and MP electronic ignition - 03/03/09 12:21 AM

Quote:

Any more problems and I might just go to a dual point distributor. I kind of miss yanking out the distributor to install/adjust points. Also, I think my dwell meter is lonely.


Mines collecting dust also ex for setting the idle speed as I dont have a tach in my daily driver
Posted By: dart4forte

Re: FBO ignition and MP electronic ignition - 03/03/09 04:31 AM

Does NAPA still sell Standard Ignition products?


Is this the FBO ECU?

Attached picture 5066432-ECU.jpg
Posted By: RapidRobert

Re: FBO ignition and MP electronic ignition - 03/03/09 05:11 AM

this is an FBO unit

Attached picture 5066509-fbomodule.jpg
Posted By: fbernard

Re: FBO ignition and MP electronic ignition - 03/03/09 02:06 PM

Salut Hervé!

and welcome to the French-talking section of the forum... (no, that is not a suggestion for the mods )
Posted By: RapidRobert

Re: FBO ignition and MP electronic ignition - 03/03/09 02:54 PM

No mas I had google translate for me & it still was barely decipherable!
Posted By: dart4forte

Re: FBO ignition and MP electronic ignition - 03/03/09 04:52 PM

This off the 4secondsflat web site. What does this mean?


Does it have REV Limiter?
The MSD Soft touch stand alone unit works fine
Posted By: aarcuda

Re: FBO ignition and MP electronic ignition - 03/03/09 05:36 PM

i was considering an FBO box years ago but i never got any specifics as to how their box fixed the old orange box problems and i never saw any test results showing before/after numbers so I passed on it. kind of glad i did
Posted By: dart4forte

Re: FBO ignition and MP electronic ignition - 03/03/09 06:21 PM

Quote:

i was considering an FBO box years ago but i never got any specifics as to how their box fixed the old orange box problems and i never saw any test results showing before/after numbers so I passed on it. kind of glad i did





I rest my case!!!!!
Posted By: PAINT IT BLACK

Re: FBO ignition and MP electronic ignition - 03/03/09 08:28 PM

My FBO setup works great, but I did have problems with the reluctor once and an ECU died on me once. Two problems in probably 1,500 miles or so... not very reassuring. I had no problem with the warranty and Don spent a lot of time on the phone with me. Don't know what I'm gonna do on the Super Bee yet.
Posted By: 440newport

Re: FBO ignition and MP electronic ignition - 03/03/09 08:45 PM

I bought the FBO setup from Dave571 about 4 years ago. Car has about 20,000 miles on it since then...never had a problem, runs excellent.
Posted By: aspenrt360

Re: FBO ignition and MP electronic ignition - 03/04/09 02:48 AM

i also have a full fbo set up i pulled my mp set up off and put this in 4 years ago with no trouble at all get better starts and power so i am a very satisfied customer!
© 2024 Moparts Forums