What Rear Came in this 67 Plymouth B Body? From Build Sheet

The build sheet has axle - 896, pinion - 35 and prop shaft - 45 in the build codes on the build sheet.

Can someone tell me what rear (8 3/4, Data, gear ratio and u joints) the car originally came with? Its a 67 Plymouth B Body.

896 = DANA60 w/3.54 gears & 11" brakes
35 = 2538935 orange 35 tooth speed-o gear
45 = ??

I see a "55" (#2781 955 3" dia. x 50-9/32" lg.)* # for DANA60 '67 Plymouth b-bodies but no "45"

* a changed part number from January '68 ('67 Parts Catalog)

Thank you very much! I was afraid of that. The Dana is gone.

I have a driveshaft with number 2852145 stenciled on. 3" diameter, 50" long with 1330 u-joints. I can't find the number in any reference or parts books.

does it have the inertia weight on the transmission end?

Yes, it does have the inertia ring.

why is that ring on some shafts and not others ?

That might be a hard one to get if you are looking for year correct. '66-'67 are different from the later Dana's.

Hello, I also have one. I have also searched for the part number in any publication with no success. Mine came from a 1967 Plymouth GTX 440, 4-speed with a Dana rear end. I never found the build sheet for the car.