Moparts

K HEMI HEAD VALVE COVER GASKET

Posted By: 1969gtx

K HEMI HEAD VALVE COVER GASKET - 11/10/17 05:05 AM

Where to get k hemi head valve gaskets
thanks bill
Posted By: AndyF

Re: K HEMI HEAD VALVE COVER GASKET - 11/10/17 07:03 AM

They can be made if nobody carries them. I used to have the pattern but not sure if I still do anymore.
Posted By: rickseeman

Re: K HEMI HEAD VALVE COVER GASKET - 11/10/17 05:35 PM

They repop them now. I forgot who makes them but one would think Kramer should have them.

Kramer Automotive 724-285-5566

Posted By: GODSCOUNTRY340

Re: K HEMI HEAD VALVE COVER GASKET - 11/10/17 07:51 PM

Jim Kramer is a good guy, he has just about everything.
Posted By: hemi71x

Re: K HEMI HEAD VALVE COVER GASKET - 11/11/17 02:00 AM

If you haven't found any from the professional sellers, vendors, i guess i could sell you these, from an old overhaul set that i still have.
Open to offers on the valve cover gaskets.
JV.

Attached picture Race Hemi Gaskets 001 (Small).JPG
Posted By: 69bfan

Re: K HEMI HEAD VALVE COVER GASKET - 11/11/17 04:52 AM

I had a limited run of the gaskets made up last year and have a couple sets still available. These are made of a cork and rubber composite material and is slightly thicker than the originals.
The reason that I made them up was we were getting request for them and a correct Max Wedge gasket as well. If you find a set of original gaskets, many of them have shrunk up over time and will no longer seal properly
If more information is needed, drop me a message.

Attached picture K_Head_Gasket_1.jpg
© 2024 Moparts Forums