Posted By: 340dart4spd
how to identify a gull wing - 02/27/09 12:50 AM
where is part number??
how to identify a gull wing
Posted By: Pacnorthcuda
Re: how to identify a gull wing - 02/27/09 12:57 AM
you can I/D it by sight. Gentle turn downs that gradually sweep back. Very different from the Go-Wing. Someone will post pics.
Or google pics of 70 and 71 Cudas and look at the difference
Or google pics of 70 and 71 Cudas and look at the difference
Posted By: 340dart4spd
Re: how to identify a gull wing - 02/27/09 01:01 AM
Quote:
you can I/D it by sight. Gentle turn downs that gradually sweep back. Very different from the Go-Wing. Someone will post pics.
Or google pics of 70 and 71 Cudas and look at the difference
maybe its a go wing..her is a pic
Posted By: Pacnorthcuda
Re: how to identify a gull wing - 02/27/09 01:04 AM
thats a GO-WING
Posted By: 340dart4spd
Re: how to identify a gull wing - 02/27/09 01:05 AM
trying to figure if its factory
Posted By: B1arno
Re: how to identify a gull wing - 02/27/09 01:47 AM
The originals I think were 36" from mounting point to mounting point. The reproductions were 3/4" closer together. At least it was that way until a few years ago when FPAP started doing a correct reproduction. My 70 'Cuda is an original wing car that the wing was taken off of. The holes are welded up on the decklid. The second owner installed a repro wing on it and the holes are inboard of the originals. I have toyed with putting a real wing back on it but have just never done it.
Arno
Arno
Posted By: 340dart4spd
Re: how to identify a gull wing - 02/27/09 02:19 AM
so whats a factory go wing worth?
Posted By: B1arno
Re: how to identify a gull wing - 02/27/09 02:52 AM
Quote:
so whats a factory go wing worth?
I haven't priced them in quite some time but they were anywhere from $100-$400 depending on if it was all there and condition. This was probably eight years ago.
Arno
Posted By: 6bblgt
Re: how to identify a gull wing - 02/27/09 03:10 AM
Factory wings have part numbers on the inside/underside of the hollow pedestals (FoMoCo & Mopar are the same parts with different numbers/logos).
The one pictured appears to be original
with aftermarket fasteners & RoadRunner/GTX reinforcement plates (real or repro?).
If wing & plates are real $400-600, if it's all repro $100-200
The one pictured appears to be original
with aftermarket fasteners & RoadRunner/GTX reinforcement plates (real or repro?).If wing & plates are real $400-600, if it's all repro $100-200