Torque spec

Hi. Need the torque spec for a clutch pressure plate, 68 charger with 440 and a 23 spline 833. Thanks, my service info system doesnt go back that far without emailing them, my bet is you guys are faster. Thanks!

http://www.mymopar.com/index.php?pid=109

No idea how to view that...

http://www.mymopar.com/downloads/servicemanuals/1969_Charger_Coronet_Dart_Service_Manual.zip

I use 35 Ft. Lbs. or 12x35=420 inch Lbs., if you have a inch lb. torque wrench that will do that amount
They should be 3/8x16 grade 8 pressure plate bolts If not get the proper torque specs. for your bolts