Moparts

1970 Duster 340 Fuseblock pics

Posted By: W5Duster436

1970 Duster 340 Fuseblock pics - 06/04/08 08:54 PM

Anybody have pics of a 70 duster fuseblock with good stenciling? don't know if the 340 rallye gauge cars are different but I need to see what size amp fuses go in it because my stenciling is almost non-existent.

Thanks in advance!
Posted By: Dart 340

Re: 1970 Duster 340 Fuseblock pics - 06/04/08 09:35 PM

I think the service manual has that info too.
Posted By: W5Duster436

Re: 1970 Duster 340 Fuseblock pics - 06/04/08 10:45 PM

I couldn't find it hence looking for pics.
Posted By: W5Duster436

Re: 1970 Duster 340 Fuseblock pics - 06/05/08 04:15 PM

Nobody has a picture of the fuse block?
Posted By: Dart 340

Re: 1970 Duster 340 Fuseblock pics - 06/05/08 04:29 PM

I can take one of mine, but won't be until tonight.

Which fuse is blown?
Posted By: W5Duster436

Re: 1970 Duster 340 Fuseblock pics - 06/05/08 04:35 PM

Quote:

I can take one of mine, but won't be until tonight.

Which fuse is blown?



The car was in pieces when I bought it and had been sitting since '79. the fusebox stenciling is pretty much non-existent and no fuses were in it.

I don't know if std. fuse block is different from the rally gauge fuse block though. Picture or simple text from left to right etc. showing what is what and what amp fuse to put in would suffice. thanks!
Posted By: RobX4406

Re: 1970 Duster 340 Fuseblock pics - 06/05/08 04:39 PM

I looked in the cars and don't have one loose here. I have to go to storage and think I have one out of the car. I'll get a crappy pic of it later today.
Posted By: W5Duster436

Re: 1970 Duster 340 Fuseblock pics - 06/05/08 04:57 PM

Quote:

I looked in the cars and don't have one loose here. I have to go to storage and think I have one out of the car. I'll get a crappy pic of it later today.



Rob at $4 a gallon don't go make a special trip..
Posted By: RobX4406

Re: 1970 Duster 340 Fuseblock pics - 06/05/08 05:29 PM

Quote:

Quote:

I looked in the cars and don't have one loose here. I have to go to storage and think I have one out of the car. I'll get a crappy pic of it later today.



Rob at $4 a gallon don't go make a special trip..



No special trip. I got yelled at the other day because there are two huge boxes in the living room. Those have to go to storage anyways.

Send me the medallion dimensions again. I've been hammered with stuff recently.
Posted By: W5Duster436

Re: 1970 Duster 340 Fuseblock pics - 06/05/08 06:10 PM

Quote:

Quote:

Quote:

I looked in the cars and don't have one loose here. I have to go to storage and think I have one out of the car. I'll get a crappy pic of it later today.



Rob at $4 a gallon don't go make a special trip..



No special trip. I got yelled at the other day because there are two huge boxes in the living room. Those have to go to storage anyways.

Send me the medallion dimensions again. I've been hammered with stuff recently.



Seemed like they were about 3/8" wide on the ends and just slightly wider in the middle and about 2" tall. I had someone send me a set from a roadrunner that were the same but about 1/2" taller and I already sent them to the upholstery shop. I have about 3 weeks though so if you have them let me know asap and I can get them to the upholstery shop.

I'll have a look at my post and see if I put dimensions in there.
Posted By: 70Duster440

Re: 1970 Duster 340 Fuseblock pics - 06/05/08 07:20 PM

My '70 Duster block is laid out like this - starting from the end where the harness enters the block:

3A INST LPS
20A TAIL LP C-LTR
20A DOME-STOP E/FLASH
20A RADIO B/UP
20A A/C HEAT
20A ACC ACC (Empty, not used)

Also attached a diagram just for grins.

Attached File
Posted By: W5Duster436

Re: 1970 Duster 340 Fuseblock pics - 06/05/08 11:49 PM

Quote:

My '70 Duster block is laid out like this - starting from the end where the harness enters the block:

3A INST LPS
20A TAIL LP C-LTR
20A DOME-STOP E/FLASH
20A RADIO B/UP
20A A/C HEAT
20A ACC ACC (Empty, not used)

Also attached a diagram just for grins.



So looking at the fuse block from the front the 3A goes in the far left slot? Thanks!
© 2024 Moparts Forums