Posted By: 1965_PLYMOUTH
1967 GTX clutch pedal assembly restore - 04/20/17 01:45 AM
I'm almost done restoring a set of pedals for a '67 GTX and am wondering what color I should paint them so not to start rusting. dull black? stainless steel?
Posted By: Stanton
Re: 1967 GTX clutch pedal assembly restore - 04/20/17 02:56 AM
Paint everything that was originally bare with "stainless". The lower portions of the pedals get semi gloss with a distinctive line where the black ends - I'm pretty sure these were dipped originally.
Posted By: 1965_PLYMOUTH
Re: 1967 GTX clutch pedal assembly restore - 04/20/17 03:38 AM
that is good information! Now if I could trouble somebody for a picture. I've seen people go all black, and it just doesn't look right.
Posted By: ACR2000
Re: 1967 GTX clutch pedal assembly restore - 04/20/17 04:25 AM
Posted By: Stanton
Re: 1967 GTX clutch pedal assembly restore - 04/20/17 02:16 PM
The pedals were not "sprayed" black, they were dipped - so there should be a definitive line where the black stops.