Headers for 1965 B-body

Does anyone out there know which 1 7/8 inch header will fit a 1965 B body? Seems as there are none out there, at least not for less than 1500 bucks. A bit of help here would be greatly appreciated.

Peace, Rev. Mopar

(865-660-2440) E-mail Racewthrev@aol.com

TTi listing says fits 62-74 b body..... Low deck, Big block, std exhaust port height

TTI and I believe Dougs or Doug Thorleys cant remember whic ones
.I run old TTIs on my 65 440 2 inch.383 man Ron rund the dougs on his 63 same as 65.TTIS are like 650 or so I believe .Mine are at least 20 years old .Rocky

Doug's D451 will fit, I have the D452 with 2" tubes and they fit perfectly
Gus

Gus, are you still using the 65 K frame?
I have an old set of hookers that one tube passes thru the inner fender and returns to the collector for my 65. Would maybe consider another set of 452's for my 65 if they fit...

DoubleD has a 65 Dodge with a 4 speed and uses the Dougs headers and they fit perfect. We also use the same header on our 64 Dodge and both have the stock k member.

Good to know...
Thx for the info...

I run the 2" TTI headers in my 63 Sport Fury with the original 63 K-frame and its a 440. I used to run 1-3/4 Hedman headers on my old 440 which worked fine and were an ok header for the price. Ron

Thanks for the response. Have been racing this car (Class of '65) in U/SA forever, but since NHRA decided that a 1976 Mustang Cobra with a 302 only had 133 HP, we have magically become rather uncompetitive. The only fit I knew about on the 65 car was Hedman, but they are 1 3/4 inches. The suggestions here are great. I looked at TTI and their current listings indicate fitment for 66-72 or something like that.

TTi makes early ones.Mine are 2 inch and have been on my 440 since they were CPPA.Thats a long time.Rocky

What BB Mopar motor fits into U/SA in which body style in 1965