Posted By: Jim L
360 magnum kickdown linkage? - 02/15/09 06:25 PM
What are you guys using for throttle cable/kickdown linkage brackets on your magnum engines? I'm using an airgap intake, 1/2 spacer and an Edelbrock AVS carb. Pics?
Posted By: Anonymous
Re: 360 magnum kickdown linkage? - 02/15/09 07:11 PM
I've got a magnum headed LA block with an airgap and an edelbrock AVS.. using the bouchillion setup.. no pictures, but looks similiar to the setup on their website
http://www.bouchillonperformance.com/BPEtkdc.aspgot the throttle bracket / kickdown cable from them... install was easy. works well, looks good.
-j
Posted By: 540challenger
Re: 360 magnum kickdown linkage? - 02/16/09 12:59 PM
I have the eddy sir gap on my magunm headed LA.
I took the stock bracket bent it to match the verital holes then went to the hardware store picked up some spacers and longer bolt. Work out well. I do have the 3 piece linkage so i had plenty of adjustment. this is on a 71 challenger