Moparts
Hood pin position 70 road runner
Posted By:
Airgrabber
Hood pin position 70 road runner -
11/04/16
09:43 PM
On a 70 road runner do the holes on the hood pin posts supposed to be in the 12&6 position or 9&3?
Posted By:
DAYCLONA
Re: Hood pin position 70 road runner -
11/04/16
10:07 PM
Originally Posted By Airgrabber
On a 70 road runner do the holes on the hood pin posts supposed to be in the 12&6 position or 9&3?
12&6...although I have seen some "survivor" cars mounted at 1&7 pass/11&5 drivers, pretty much in line with the X layout of the hood pin bezel screws
Posted By:
Airgrabber
Re: Hood pin position 70 road runner -
11/05/16
01:26 AM
Were any Mopar at 9&3?
Posted By:
MI_Custumz
Re: Hood pin position 70 road runner -
11/05/16
03:51 PM
I would assume it's so they won't get wind resistance and fall out? Kind of like how they used left handed lug nuts for a while.
Posted By:
BS23H1B
Re: Hood pin position 70 road runner -
11/07/16
10:14 PM
This is from an original AAR Cuda. 3&9
© 2024
Moparts Forums